Ubiquiti UniFi UAP-AC-IW In Wall Access Point

Ubiquiti UniFi UAP-AC-IW In Wall Access Point

The Ubiquiti UniFi UAP-AC-IW transforms an Ethernet wall connection into a dual-band 802.11AC WiFi Access Point. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network.

Ubiquiti UniFi UAP-AC-IW Key Features

○ 802.3at PoE+
○ 3x 10/100/1000 Ethernet Ports
○ 2.4GHz radio rate 300 Mbps
○ 5GHz radio rate 867 Mbps
○ Dual-band 802.11ac

The Ubiquiti UniFi UAP-AC-IW provides simultaneous, dual-band, 2×2 MIMO technology and is available in single and five packs (PoE adapters not included).

Easier Than You Think
Ideal for new and retrofit installations, the UniFi® AC In-Wall is designed to convert an Ethernet wall jack into a dual-band 802.11ac Wi-Fi access point with two Gigabit Ethernet ports.

Versatile Data and PoE Output
An Ethernet wall jack becomes an access point, a gigabit switch, and a PoE power source.
Wire a workstation and power a VoIP phone. Or power a US-8 for even more Ethernet ports.

Ubiquiti UAP-AC-IW Technical Specification

• Dimensions 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01″)
• Weight 200 g (6.43 oz)
• Networking Interface (3) 10/100/1000 Ethernet Ports
• Buttons Reset
• Power Method Passive Power over Ethernet (48V),
• 803.2at Supported
• (Supported Voltage Range: 44 to 57VDC)
• Power Supply UniFi Switch (PoE)
• Power Save Supported
• PoE Out 48V Pass-Through (Pins 1, 2+; 3, 6-)
• Maximum Power Consumption 7W
• Maximum TX Power: 2.4 GHz: 20 dBm, 5 GHz: 20 dBm
• Antennas: 2.4 GHz: 1 dBi, 5 GHz: 2 dBi
• Wi-Fi Standards 802.11 a/b/g/n/ac
• Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
• BSSID Up to Four per Radio
• Mounting 1-Gang Electrical Wall Box (Not Included)
• Operating Temperature -10 to 50° C (14 to 122° F)
• Operating Humidity 5 to 95% Noncondensing
• Certifications CE, FCC, IC.