Ubiquiti UniFi WiFi 6 In-Wall Access Point (U6-IW)
Original price was: KSh35,000.00.KSh34,000.00Current price is: KSh34,000.00. + VAT
1,250 ft² coverage
300+ connected devices
WiFi6 (4×4 MIMO)
Powered using PoE*
*PoE+ input required for single port PoE output.
Buy online at Best Price in Nairobi Kenya
Ubiquiti UniFi WiFi 6 In-Wall Access Point (U6-IW) Features
The Ubiquiti UniFi WiFi 6 In-Wall Access Point (U6-IW) is a dual-band, wall-mounted access point with (4) GbE RJ45 ports, bringing plug-and-play WiFi 6 to your home or office. One of the U6 IW’s ports also supports PoE output so you can connect and power an Ethernet device.
With its 2.4 and 5 GHz WiFi 6 bands, the U6 IW offers an aggregate, over-the-air throughput rate of 5.3 Gbps, which can support over 300 clients.
The U6 IW is also Bluetooth-compatible so it can be set up in minutes and managed from anywhere via the UniFi Network web application or mobile app.
Ubiquiti UniFi WiFi 6 In-Wall Access Point (U6-IW) Key Features:
- High-efficiency, four-stream WiFi 6 technology
- 5 GHz WiFi 6 band (4×4 MU-MIMO and OFDMA)
- 2.4 GHz WiFi 6 band (2×2 MU-MIMO)
- (4) GbE RJ45 ports, including one that supports PoE output300+ client capacity
- Simple, Bluetooth-powered setup via the UniFi Network web application or mobile app
Build features
Deployment
In the box
Ubiquiti UniFi WiFi 6 In-Wall Access Point (U6-IW) Technical Specifications;
Mechanical
- Dimensions 139.66 x 96 x 31.19 mm (5.5 x 3.78 x 1.28″)
- Weight 460 g (1.01 lb)
- Enclosure materials Plastic, aluminum
- Mount material Aluminum
Hardware
- Processor specs Dual-Core® Cortex® A53 at 1 GHz
- Memory information 1 GB
- Management interfaces Ethernet
Bluetooth - Networking interfaces (1) Data-in: 1GbE RJ45 port
(4) Data-out: 1GbE RJ45 ports - PoE interfaces (1) PoE in (PoE output not used)
(1) PoE out (requires a PoE+ switch) - Button Factory reset
- LED* White/blue
*Due to chip supply shortages, the U6 AP’s LED has been limited to only white and blue color modes. - Power method PoE
- Power supply UniFi PoE switch
48V, 0.5A PoE adapter (optional) - Max. power consumption Excluding PoE output: 13.5W
- Max PoE wattage per port by PSE 15.4W*
*Requires a PoE+ switch - Voltage range PoE mode 44 to 57VDC
- Max. TX power
2.4 GHz 22 dBm - 5 GHz 26 dBm
- MIMO
- 2.4 GHz 2 x 2 (UL MU-MIMO)
- 5 GHz 4 x 4 (DL/UL MU-MIMO)
- Throughput rate
- 2.4 GHz 573.5 Mbps
- 5 GHz 4.8 Gbps
- Antenna gain
- 2.4 GHz 5 dBi
- 5 GHz 5.9 dBi
- Operating temperature -30 to 60° C (-22 to 140° F)
- Operating humidity 5 – 95% noncondensing
- Certifications CE, FCC, IC
Software
- WiFi standards 802.11a/b/g
WiFi 4/WiFi 5/WiFi 6 - Wireless security WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
- BSSID 8 per radio
- VLAN 802.1Q
- Advanced QoS Per-user rate limiting
- Guest traffic isolation Supported
- Concurrent clients 300+
- Zero-wait DFS Yes
Supported Data Rates (MBPS)
- 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11b 1, 2, 5.5, 11 Mbps
- 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- 802.11n (WiFi 4) 6.5 Mbps to 600 Mbps (MCS0 – MCS31, HT 20/40)
- 802.11ac (WiFi 5) 6.5 Mbps to 3.4 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80/160)
- 802.11ax (WiFi 6) 7.3 Mbps to 4.8 Gbps (MCS0 – MCS11 NSS1/2/3/4, HE 20/40/80/160)
See product datasheet
1 review for Ubiquiti UniFi WiFi 6 In-Wall Access Point (U6-IW)
Add a review
You must be logged in to post a review.
Related products
Ubiquiti Products Kenya
Ubiquiti Products Kenya
Networking Equipment
Networking Equipment
Eunice Waweru –
This access point is a game-changer for room-specific coverage. It perfectly replaces a standard wall outlet, delivering blazing WiFi 6 speeds and a dedicated Ethernet port for a desktop, all while maintaining a clean, low-profile look.