Cambium ePMP 2000 Sector Antenna, 5 GHz, 90°/120°

Cambium ePMP 2000 Sector Antenna, 5 GHz, 90°/120°

Cambium ePMP 2000 Sector Antenna, 5 GHz, 90°/120° has designed an antenna solution that enables network operators to increase the spectral efficiency and scale of their ePMP point to multi-point (PMP) distribution access networks.

Wireless Service Providers deploying networks in 5GHz spectrum will find this sector antenna for 90° and 120° applications especially well-suited for high-density networks requiring frequency re-use and wide-band spectrum coverage.

Product Features

• Frequency Reuse: Designed for ABAB channel re-use (two channels covering four sectors), the sector antenna has 35 dB front to back ratio including a wide aperture in the rear facing direction
• Channel Flexibility: consistent gain from 4.9 to 6.0 GHz allows the operator to select a channel anywhere in the band and achieve the expected performance
• Consistent Coverage: Excellent null fill capabilities of the antenna allow for broad geographical coverage within a sector even near the base of the tower and the edges of the sector
• Designed for the Installer: Small compact design, integrated ePMP radio mount and GPS antenna integration
• Predictable Performance: The sector antenna is integrated into Cambium Networks LINKPlanner. The 3D model shows coverage at all elevations and across the azimuth

Product Specifications

• Frequency Range: 4.9GHz to 5.97GHz
• Gain: 18dBi
• 3 dB Beamwidth – Azimuth: 90 degrees
• 6 dB Beamwidth – Azimuth: 120 degrees
• 3 dB Beamwidth – Elevation: 6 degrees
• Electrical Downtilt: -2 degrees
• Polarization: Horizontal and Vertical
• Port-to-Port Isolation: > -30 dB
• Front-to-Front Ratio: 35 dB
• Maximum Input Power: 5 W
• Input Impedance: 50 ohms
• Mounting Connectors: 2 x RPSMA
• Mounting Hardware: Included for mounting to mast diameters 2″ to 4″ (5 cm to 10 cm), -10 to +5 degree tilt, Hardware included to connect ePMP access point to back of antenna body
• Physical Dimensions (Antenna Body): 23.4″ (H) x 6.2″ (W) x 4.3″ (D) (584 mm x 157 mm x 110 mm)
• Physical Dimensions (with ePMP 1000 Access Point): 23.4″ (H) x 6.2″ (W) x 5.9″ (D) (593 mm x 157 mm x 150 mm)
• Weight: Antenna Body: 8.8 lbs. (4.0 Kg). With ePMP 1000 Access point and Mounting Brackets: 11.6 lbs. (5.26 Kg)
• Environmental: IP65
• Radome Material: UV Protected ABS
• Operating Temp: -40°C to 60°C (-40°F to 140°F).