Buy DATA/NETWORK/SERVER CABINET at best Prices in Kenya
A data cabinet, also known as network cabinets or Server Cabinets, offers safe and secure storage for all your Networking Equipment such as Routers, DVRs, Networking Switches, Servers, and much more.
Network cabinets are often confused for server cabinets. Still, there is a difference: that is, network cabinets are generally used for the storage of routers, patch panels, switches, and a wide variety of networking types of equipment and also networking accessories, whereas server cabinets are mostly used to install servers, UPS ES, monitors or similar equipment.
A server rack cabinet is are generally 19 inches wide by industry standards but, for the most part, is 24 inches wide and 36 inches deep. Server rack cabinets are usually perforated, front and rear, to offer ventilation for the equipment being housed and to provide a safe environment for this equipment, which acts as good heat emitters.
On the other hand, network cabinets are shallower than server cabinets, measuring at less than 31 inches deep. Network cabinets will sometimes have a glass or strong plastic front doors. Unlike server cabinets, network cabinets do not have perforated enclosures because the equipment housed do not emit a lot of heat.
WALL MOUNT Cabinet
They offer safe and secure storage for all your Networking Equipment such as Routers, DVRs, Networking Switches, and Servers. They are divided into two categories; closed wall mount server cabinet and open frames wall mount cabinets.
Closed wall mount network cabinet
These are closed types of network cabinet used to house network gadgets like routers, servers, switches, etc. Wall-Mount Rack Cabinets can be mounted on walls, positioned on flat surfaces, or rolled under desks, tables, or counters, and are perfect for housing IT equipment in rooms with limited floor space. To determine the maximum depth you need, measure your equipment’s depth, and add 3 inches to allow space for cabling. A cabinet with a maximum depth of 20.5 inches will accommodate equipment with a maximum of 17.5 inches depth. Sturdy steel panels surround all sides of equipment, preventing unauthorized access to network devices, ensuring the physical security of equipment that processes, stores, and transmits credit card data. As long as you have a surface capable of bearing a unit’s combined weight and the equipment inside it, mounting a cabinet is quite simple. Most Wall-Mount Rack Cabinets are constructed of sturdy steel frames with securely locking front doors, side panels, and wall brackets. Perforated front doors and side panels permit generous airflow to keep equipment operating safely. Depending on the model, Wall-Mount Rack Cabinets can hold between 150 and 250 lbs. of equipment. Most cabinets include a sturdy hinge between the cabinet and wall bracket, allowing the cabinet to swing away from the wall for easy access to equipment and cabling. Top and bottom panels include channels for cable routing, and front doors and side panels are removable.
Open frames wall mount
Open frame wall mount racks allow for easy access from all sides. Whether you need access to inputs or simply serial codes on the side of your machines, these open frame wall mount racks give you a clear view from all angles. As usual, these open frame racks are all quite different. From swinging to hinged pivot to fixed and secure, they can come in a wide range of different sizes so that they can house almost any type of equipment. The airflow is easy to manage. Equipment fans can be installed to direct warm air out of the area. Additional air-cooling options can be used to maintain a precise temperature; they are divided into many categories, like fixed open frames, swinging open wall racks, sidewall mounts, etc.
These Cabinet Include;
- Fixed open frame
- swinging open wall racks
- Side mount wall mounts
Freestanding racks are designed for secure and easy accommodation of equipment, including cabling. It comprises freestanding sheet steel and stainless steel enclosures for indoor and outdoor use because it withstands even in the most demanding industrial facilities. The freestanding enclosure has a smooth design made from the latest laser-welding technology. Their body provides high rigidity and is compatible with many industrial, electrical engineering, and automation fields. Each of the enclosure’s 54 dimensions is made with either plain or glazed doors. The range includes powder-coated stainless steel enclosures and stainless steel enclosures for applications that need more protection from the environment.
DIFFERENT SIZES OF A CABINET
The network cabinets‘ height is calculated in separate units, called U or RU (rack unit, rack unit). In particular, 1U = 1.75 inch (4.45cm), common sizes for you to choose include 42U, 36U, 27U, 20U, 15U, 10U . More specifically, a 9U network cabinet (standard size) will 19 inches (approximately 48cm) wide and 15.75 inches (approximately 40cm) high. The standard cabinets are at least 36 inches (900 mm) deep or even deeper. One particular server is 40 inches (1,000 mm) deep and requires a 48-inch- (1,200 mm) deep cabinet. Height, on the other hand, is often dependent on the room where the cabinets are located. Therefore, it is important to have various choices in heights and depths when evaluating the cabinet design. There are also significant design considerations inside the enclosure. Determining the height of the network cabinets is very important. It would help if you considered not only the current user needs but also future developments. Be sure to choose the type of closet so that you can comfortably arrange hardware devices and cable routing in the most scientific way. This is not just a matter of whether you can fit the necessary equipment into the network cabinets, but also to promote ventilation, clean and neat inside the cabinet space. A spacious network cabinet, devices arranged in harmony will certainly give a better cooling effect, more safety, and help improve the server’s performance.
Small network cabinets: From 1U to 12U
small network cabinets are the most commonly used network cabinets for basic information technology needs (in offices, small businesses). They can vary depending on the particular situation. They are mostly used in limited spaces. Small network cabinets (from 1U to 6U) are usually installed in height-restricted spaces, even wall mounted. Network cabinet also important to consider the weight of the network cabinet as, in fact, some devices (such as UPS) may be bulky, heavy, and need a stronger network cabinet.
Medium size network cabinets: 18U, 22U and 32U
They are the most commonly used network cabinets in small and medium-sized companies and offices. Telecommunication devices, servers, and network equipment can be installed in these cabinets, allowing for easier routing and cable routing. They are often fitted with wheels to make them easy to move around the structure, allowing airflow from outside to inside and vice versa more effectively.
Large network cabinets: 42U, 45U and 48U
cabinets models in this segment are sometimes called Higher-U. In particular, 42U network cabinets are the most commonly used type, sed for professional audio and video equipment. Of course, to accommodate both large-scale servers and network systems, they are used in companies that provide networks. Large network cabinets are usually made up of sturdy metal frames, stand on the floor.
DIFFERENT PARTS OF A CABINET
A server rack is made up of various parts, large and small. Although the names of its components are called different by each manufacture, they are similar in structure because of the same use.
There is a frame of “welding type” in which parts such as pillars and beams are welded together and “assembly type,” assembled by connecting columns and beams with bolts or the like. It is greatly related to strong performance for shock resistance and earthquake resistance.
Mounting rails are for installing mount server. That is called mount rails, mounting rails, and mount frame, and so on.
the front door should be attached for the security of the cabinets. We have both closed-door type and open-door type.
Doors are attached to the entire surface of the door with acrylic windows so that you can check the contents from the outside plus, and the security performance is higher in this type the heat is trapped in the server rack
Open door type
open door types have many holes on the surface so that heat does not stay inside the server rack. The data center company really cares to manage airflow in the data center. For that reason, many data center companies use open-door type racks.
The rear door is basically the same as the front door. However, the front door and the rear door are not necessarily the same type of door., the front door is a single door, but the rear door is double doors. That can be changed for usability
Side panels are attached right and left sides of a server rack. And are of different types one side panel covering with a server rack from the bottom to top is the fundamental version. Two side panels version is for ease of detaching. Used When cabling among server racks because it has side panels that have cabling holes on side panels.
The top panel is a part of the top of a server rack. It is the same as the side panels. There are many types such as cabling hole type, open type, and so on. In Some cases, you need to attach fans on top to dissipate heat in the server rack when you use a closed-door type rack because of the capability that warm air tends to flow from bottom to top.
The base is a basement of a server rack. Sometimes server rack is not needed to attach the base, .but . one of the reasons why installing a base is for connection between a rack and ground. Is because it’s used for earthquake resistance.