Cambium ePMP 2000 5GHz Access Point Lite
Overview:
Cambium ePMP 2000 5GHz Access Point Lite has set the standard for high-performance, scalability, and reliability in harsh interference environments all at a compelling price. ePMP 2000 is the next-generation Access Point bringing interference tolerance to a whole new level with unique Hypure technology. Which combines Intelligent Filtering and Smart Beamforming to deliver new levels of performance in the face of interference.
The ePMP 2000 System consists of high-performance, GPS-Synchronized Access Point (AP) Radio with Intelligent Filtering, a new compact high-performance Secotr Antenna, and an optional Smart Antenna.
Intelligent Filtering improves both receive and transmit performanc. It protects the network from off-channel interferers with a filter that dynamically moves around the channel. On the transmit side, it protects the RF environment by reducing off-channel transmission noise.
Smart Beamforming drastically reduces the effects of on-channel interference. The System learns the locations of each served Subscriber Module (SM) and forms a narrow beam toward the desired SM while that radio is transmitting in the uplink. This reduces the gain on the uplink for on-channel interferers that are transmitting at an azimuth angle dfferent than the SM, delivering performance gains never before seen.
Key Advantage:
- Industry-Leading Interference Tolerance: Intelligent Filtering hardens ePMP 2000 to strong off-channel interferers and reduces off-channel noise for better radio co-location. Smart Beamforming with the optional Smart Antenna delivers dramatic performance improvements when dealing with strong co-channel interference.
- Frequency Reuse: GPS Synchronization and Transmit Power Control allow for industry-leading frequency reuse.
- Unmatched Performance and Scalability: With the efficient ePMP MAC protocol and advanced air-fairness scheduler, up to 120 simultaneously active Subscriber Modules can be served without performance degradation.
Key Specifications:
- Supports up to 120 Subscriber Modules
- Supports a wide frequency range: 5150 – 5970 MHz
- 802.3at compliant 100/1000BaseT Interface
Specifications:
| ePMP 2000 Access Point Specifications | |
|---|---|
Spectrum | |
| Channel Spacing | Configurable on 5 MHz increments |
| Frequency Range | 5 GHz: 4910 – 5970 MHz (exact frequencies as allowed by local regulations) |
| Channel Width | 5 | 10 | 20 | 40 MHz |
Interface | |
| MAC (Media Access Control) Layer | Cambium proprietary and optionally standard 802.11n |
| Physical Layer | 2×2 MIMO/OFDM |
| Ethernet Interface | 100/1000BaseT, rate auto negotiated, 802.3at compliant
|
| Powering Methods Supports | 56 V PoE (included), standard 802.3at PoE Supply, or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter |
| Protocols Used | IPv4, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping, LLDP, DHCP, RADIUS, NTP |
| Network Management | HTTPs, SNMPv2c, SSH, Cambium Networks cnMaestro |
| VLAN | 802.1Q with 802.1p priority |
Performance | |
| Subscribers per Sector | Up to 120; Lite version limited to 10 |
| ARQ | Yes |
| Nominal Receive Sensitivity (w/FEC) @20MHz Channel | MCS0 = -93 dBm to MCS15 = -69 dBm (per branch) |
| Nominal Receive Sensitivity (w/FEC) @40MHz Channel | MCS0 = -90 dBm to MCS15 = -66 dBm (per branch) |
| Modulation Levels (Adaptive) | MCS0 (BPSK) to MCS15 (64QAM 5/6)
|
| GPS Synchronization | Yes, via internal GPS or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter |
| Quality of Service | Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority |
| Transmit Power Range | 0 to +30 dBm (combined, to regional EIRP limit) (1 dB interval) |
Recommended Antennas | |
| Sector Antenna | ePMP Sector Antenna (C050900D021A) available |
| ePMP 2000 Smart Antenna | ePMP Smart Antenna (C050900D020A) available (complimentary; does not replace Sector Antenna) |
Physical | |
| Sector Antenna Connection | 2 x 50 ohm, RP (reverse polarity) SMA |
| Beamforming Antenna Connection | 2 x 50 ohm, RP (reverse polarity) SMA, DC coupled (powering antenna) |
| GPS Antenna Connection | 1 x 50 ohm, RP (reverse polarity) SMA |
| Surge Suppression | 1 Joule Integrated
|
| Environmental | IP55 |
| Temperature | -22 to 131 deg F (-30 to +55 deg C) |
| Power Consumption | 20 W Mazimum1 |
| Input Voltage | 44 V to 59V
|
| Weight | 0.7 kg (1.5 lbs) without brackets |
| Dimensions (L x W x H) | 22.2 x 12.4 x 4.5 cm (8.75 x 4.9 x 1.75 in) without brackets |
| Pole Mount Included | Yes |
| Environmental Cover Included | Yes |
Security | |
| Encryption | 128 bit AES (CCMP mode) |
Certifications | |
| FCCID | Z8H80FT0020 |
| Industry Canada | 109W-0020 |
| CE | EN 302 502 v1.2.1 EN 301 893 v1.7.1 |


Eunice Waweru –
Exceptional value for a professional-grade, cloud-managed wireless solution. The integrated cnMaestro management makes deployment and monitoring incredibly simple, offering carrier-class features and reliability without the high cost.