HPE ProLiant ML350 Gen10 Tower Servers
Original price was: KSh338,000.00.KSh336,900.00Current price is: KSh336,900.00. + VAT
- HPE ProLiant ML350 Gen10 4U Tower Server for small business or Enterprise
- Dual (2) Xeon Gold 6148 20-Core 2.40 GHz, 27.5MB, Up To 3.70 GHz Turbo
- Memory: 256GB (8 x 32GB) DDR4 PC4-25600 3200MHz Unbuffered Memory
- Storage: 30.72TB (4 x 7.68TB) Enterprise 2.5” SATA III 6Gb/s SSDs for Ultra Fast Storage
- Hard drives and memory upgrades included separately, not installed, installation required.</span>
HPE ProLiant ML350 Gen10 Tower Servers
Designed for high-performance tasks for small to medium businesses, the HPE ProLiant ML350 Gen10 Server can be outfitted with dual 1st or 2nd Generation Intel Xeon Scalable Processors. There are a total of 24x DIMM slots on the system board evenly divided between each of the CPU sockets. At full capacity, it will support up to 3TB of memory.
The front of the system supports 24x 2.5-inch (SFF) hybrid hot-swappable drive bays or 12x 3.5-inch (LFF) hybrid hot-swappable drive bays when you install optional drive cages. Mixing different form factor drives are not allowed. Eight PCIe slots are available to expand system capabilities.
Performance
Dual 1st or 2nd Generation Intel Xeon Scalable Processors can be installed on this HPE ML350 Gen10 Server. The hardware configuration on this system provides support for processors with a minimum of 4x physical cores to a maximum of 28x physical cores.
Virtual thread counts range from 8x and 56x, per CPU. Dual fans at the rear of the chassis are standard for basic system cooling. An optional redundant fan kit with 4x hot-pluggable fans can be installed in a N + 1 redundant configuration just behind the drive backplane supporting 2P and/or advanced cooling requirements.
Memory
The Scalable CPUs support 6x memory channels. Each memory channel supports 2x DIMM slots for a total of 24x DIMM slots and 12x DIMM slots per CPU. The maximum memory configuration on this system is 3TB when 128GB DDR4 Load Reduced (LRDIMM) DIMMs are installed. Registered (RDIMM) modules will provide half the capacity of LRDIMMs. Maximum supported memory speeds supported on this system are 2933MT/s.
Storage
Storage on the HPE ML350 Gen10 is generous with support for up to 24 x 2.5-inch SAS, SATA SSDs HDDs and up to eight SFF NVMe PCIe drives with the additional of optional drive cages. The 2.5-inch chassis configuration supports a default drive cage on the lower portion of the chassis with 8x 2.5-inch drive bays.
You can install two additional drive cages, and each cage supports 8× 2.5-inch drives. This brings the total to 24× 2.5-inch drive bays. The 2.5-inch chassis supports up to 8× NVMe drives, but you must install them in the center-mounted optional Express Bay drive cage.
An NVMe kit has two x4 Direct Attached PCIe NVMe riser boards each of which can support four drives or a total of eight with both risers installed. A 4-Bay 3.5-inch drive bay chassis configuration supports up to 12 front-mounted drive bays, total when upgraded with 2x additional drive cages.
Storage
Each drive cage can support 4x 3.5-inch drives for a total of 12x drive bays. Each configuration has a control panel at the top with system health, NIC status, two USB 3.0 ports and a dedicated iLO service port. A front bezel with security lock is standard equipment on this system. A single MicroSD card slot is located adjacent to PCIe slots 5-8 below the power supply.
You can manage the hard drives with the integrated HPE Smart Array S100i SR Gen10 for software RAID, or with an optional HPE Smart Array Gen10 controller that provides hardware RAID and supports SAS drives.
A universal enablement card kit supports M.2 drives and works only in PCIe slots 1–4. Each system can use only one kit, which provides software RAID functionality. Some of these configurations may require a redundant fan kit.
Expansion
Eight PCIe 3.0 slots provide connections for a number of devices to support your workload. PCIe slots 1-4 located in the lower back of the chassis are supported by CPU 1, and optional GPUs can be installed in slots 1 and 3. PCI slots 5-8 are active with the addition of a second processor with slots 5 and 7 supporting optional GPUs.
You can install up to four double-width GPUs like the Nvidia P4000, P6000 and Tesla P40 but only two Nvidia Tesla M10 quad GPU modules. There is an embedded four port 1GbE on the back of the system but you have a lot of choices for network communications with 1GbE, 10GbE, 10/25GbE, and 100GbE QSFP. The same goes for Smart Array HD/RAID controllers—lots of choices.
Management
HPE’s suite of management tools, including HPE Integrated Lights Out (iLO) Advanced, simplifies managing the HPE ML350 Server with out-of-band system control. HPE OneView helps with even more management tools for converged infrastructures and multiple servers.
All Gen10 servers now include updated security with Runtime Firmware Validation, a feature of the iLO Advanced Premium Security Edition. Secure recovery lets you roll back the firmware to the last safe version.
Specification
| Data sheet Technical specifications | HPE ProLiant ML350 Gen10 server |
| Processor type | Intel® Xeon® Scalable processors, 1st and 2nd generations |
| Processor name | Intel® Xeon® Scalable processors, 1st or 2nd generation |
| Processor family | 1st generation: Intel® Xeon® Scalable 8100 series, Intel® Xeon® Scalable 6100 series, Intel® Xeon® Scalable 5100 series, Intel® Xeon® Scalable 4100 series, Intel® Xeon® Scalable 3100 series 2nd generation: Intel® Xeon® Scalable 8200 series, Intel® Xeon® Scalable 6200 series, Intel® Xeon® Scalable 5200 series, Intel® Xeon® Scalable 4200 series, Intel® Xeon® Scalable 3200 series |
Processor number | 1 or 2 |
| Processor core available | 28 or 26 or 24 or 22 or 20 or 18 or 16 or 14 or 12 or 10 or 6 or 8 or 4, depending on model |
| Processor cache | 38.50 MB L3 – 8.25 MB L3, depending on model |
| Processor speed | 3.9 GHz, maximum depending on processor |
Power supply type | HPE Flexible Slot Redundant Power Supply modules 500W / 800W / 1600W, depending on model SKU, or HPE Standard 500W Non-Hot-Plug/non-RPS Power Supply (ordering limited to non-EU/EMEA countries/regions) |
| Expansion slots | 8-slots (x16, x8, x16, x8, x16, x8, x16, x8) as standard in 2P model. For detail reference QuickSpecs. |
| Maximum memory | 3.0 TB with 128 GB DDR4 DIMM |
| Memory, standard | 32 GB (1 x 32 GB) RDIMM or depending on model |
| Memory slots | 24 DIMM slots |
| Memory type | HPE DDR4 SmartMemory |
| Memory protection features | Advanced ECC Memory Online Spare Mode Memory Lock Step Mode |
| Included hard drives | None Ship Standard |
Optical drive type | Optional DVD-ROM or DVD-RW. Optional via Slim-line ODD Bay Kit. Optional external support is available too. Optional Half-Height RDX or Tape, up to 2. Optional via Media Drive Support Kit. For detail reference QuickSpecs. |
| System fan features | Depending on model SKU. Standard 2 fans, none-hot-plug. Optional 4 additional fans, hot-plug and N+1 redundancy Reference QuickSpecs for config. detail. |
| Network controller | HPE Ethernet 1Gb 4-port 369i Adapter |
| Storage controller | 1 HPE Smart Array S100i and/or 1 HPE Smart Array P408i-a SR Gen10 and/or 1 HPE Smart Array E208i-a Gen10, depending on model. For detail reference QuickSpecs. |
| Product dimensions | 46.25 x 64.8 x 17.4 cm |
| Weight | 21 kg |
Infrastructure management | HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download) (standard), HPE iLO Advanced, and OneView Advanced (optional) |
| Warranty | 3/3/3 – Server Warranty includes three years of parts, three years of labor, three years of onsite support coverage. Additional information regarding worldwide limited warranty and technical support is available at: http://h20564.www2.hpe.com/hpsc/wc/public/home. Additional HPE support and service coverage for your product can be purchased locally. For information on availability of service upgrades and the cost for these service upgrades, refer to the HPE website at http://www.hpe.com/support |
| Drive supported | 24 SFF SAS/SATA HDD/SSD, or 16 SFF SAS/SATA HDD/SSD and 8 SFF NVMe SSD. 12 LFF SAS/SATA HDD/SSD or 12 LFF NHP SATA HDD, depending on model. Upgrade option kits are available. |
Explore related;
HPE ProLiant DL380 Gen9 2U Rack Server
HPE DL380 Gen9 E5-2620v4 Kit for V4 Series Servers
HPE 300GB SAS 10K SFF SC DS Hard Drive – 872475-B21
HPE ProLiant DL380 Gen11 Intel Xeon 2U Rack Server
1 review for HPE ProLiant ML350 Gen10 Tower Servers
Add a review
You must be logged in to post a review.
Related products
HPE Aruba Network Equipment Dealer and Supplier
Networking Equipment
HPE Aruba Network Equipment Dealer and Supplier
HPE Aruba Network Equipment Dealer and Supplier
Eunice Waweru –
The HPE ProLiant ML350 Gen10 Tower Server delivers exceptional performance and expandability for growing businesses. Its robust security features and reliable design ensure continuous, efficient operation.